Performance Diesel Intercoolers Australia | 4WD Performance Parts
10% OFF All Products EOFY SALE
Discount added at checkout
$2,200.00 incl. GST
Radar Mounting: The facelift model comes with radar in the lower part of the grill. If you plan to run a bullbar and driving lights, we recommend selecting a bullbar that relocates the radar into the bullbar so that it continues to function correctly. This also makes intercooler install seamless, as otherwise the radar must be mounted onto a PDI bracket and pushed forward of its original location (to clear the intercooler).
GDJ79 Plumbing: The GDJ79 model features short, simple plumbing leading to the intercooler, providing a significant improvement over the engine’s small heat exchanger. We know that this intercooler can maintain low intake temps for repeated dyno runs and will allow the engine to maintain peak torque output when loaded up. These have been installed on several vehicles and codes associated with the intercooler coolant system successfully deleted.
Why Front Mount Beats Top Mount
Top mount intercoolers are popular due to ease of installation and bonnet scoop aesthetics but they simply can’t match the performance of a properly designed front mount.
A front mount intercooler delivers:
On standard injectors, a late model dual cab has made 220rwkw with the assistance of our PDI front mount. In a single quick run you can do that with other intercoolers but our kits have shown they can repeat this many times due to the superior heat dissipation.
Tests we’ve done have shown the drop in post intercooler intake air temperature was 3x greater with the PDI intercooler than the best of the aftermarket top mount options available. The intake air temperatures were cooler at all speeds.
Note: for the 2022-2023 VDJ79, fitted with adaptive cruise control, we have a bracket together that will allow the sensor (positioned behind the Toyota emblem) to be mounted further forward to clear the intercooler. This is not required on earlier models and also not required if you select a bullbar that allows the sensor to be relocated into the bullbar. The sensor itself is not very compact so to allow it to fit in front of the intercooler means it will sit 70mm forward of its current location and therefore the Toyota logo will need to be removed from the grill and mounted further forward too.
We have installed a number of the PDI front mount kits with great results. When done on its own, the difference it makes to the performance is immediately detectable as the engine control system is adjusting performance based on inlet air temperature and the performance is more spirited under all conditions. The cooler the weather the better your turbo engine performs and this is due to cooler intake temperatures. Customers have reported the PDI intercooler is the best mod they have done for both regular driving and or chasing all out power.
Upgrades are now allowing tuners to push beyond 300kW at the wheels, so we have designed the Mk3 core to be even more effective. It has been made to have the maximum width (700mm) with custom end tanks and 3” outlets that go through next to the headlights into the engine bay. The increased width gives the core better cooling capability as more fresh air is being pushed and drawn through for further improved cooling. The improved position allows the new Mk3 core to be closer to the condenser, which means there will be more effective pull from the engine cooling fan at low speed. Being close, it will be possible to make the seal even better with foam packing to further increase the draw through.
Our PDI kits do not interfere with the airbag sensors at the front so these kits can be installed on current model 70 series. No cutting of the structure needs to be done. Only the grill and lower painted panel will need to cut and ground to make room.
EGT Gauges
If you plan to install an EGT probe, we recommend doing this into the dump pipe after the turbo. Recently we have decided to stock an EGT probe system that uses a Class A probe with 2m long lead and digital display making it easy to read and mount. We have another option in green that has a smaller thread for mounting into intake air temps if you wish to see how you system is performing. These can be purchased HERE
Brake Booster Upgrade
PDI have the only brake booster upgrade on the market for the ABS and non-ABS VDJ79. The factory booster is a small single diaphragm unit which is insufficient in when towing or when wheel size is increased. The PDI upgrade for the 79 is a dual diaphragm unit with larger than standard diameter giving an increase in the mechanical advantage able to be applied to the master cylinder by 50% and has transformed the vehicle for many 79 series owners. Can can be purchased by clicking the link: 79 ABS (including traction control models) and 79 non-ABS
3.55 Diff Gears
To drop your engine RPM in all gears and spread the RPM in each gear we stock 3.55 gears and solid spacers. They can be purchased HERE.
Short Shifter for Manual Transmission.
Our short shifter goes into the top of the box and reduces the shifter throw by 60%. These give a much more positive feel on the engagement. Available HERE
Automatic Transmission Upgrade
PDI have a Ford 6 speed auto installed in a high powered turbo diesel Landcruiser and are working to make this available for the VDJ79. If this interests you please contact use to see how this is progressing and maybe asked to be put on a list. Read more about it under our news page HERE.